VIBA-HDPE
Contact: 0985 746 295 - 035 274 3537
Price: Contact
DESCRIPTION
VIBA- HDPE is pre- applied, HDPE surface, self adhesion and fulled bonding include many of composite layers material which gives the outstanding waterproofing effectives, it contains a high density PE layer, a self adhesion polymer layer and a special aggregates layer. VIBAHDPE is used to waterproof the blind concrete surface, the upper aggregate side is made for application the reinforced system on the top and then fulled bonding and eternity to the concrete after casting. VIBAHDPE membrane is supplied with the 1m, 2m width in order to suitable with many different construction conditions.
VIBA- HDPE is pre- applied, HDPE surface, self adhesion and fulled bonding include many of composite layers material which gives the outstanding waterproofing effectives, it contains a high density PE layer, a self adhesion polymer layer and a special aggregates layer. VIBAHDPE is used to waterproof the blind concrete surface, the upper aggregate side is made for application the reinforced system on the top and then fulled bonding and eternity to the concrete after casting. VIBAHDPE membrane is supplied with the 1m, 2m width in order to suitable with many different construction conditions.
Product detail
DESCRIPTION
VIBA- HDPE is pre- applied, HDPE surface, self adhesion and fulled bonding include many of composite layers material which gives the outstanding waterproofing effectives, it contains a high density PE layer, a self adhesion polymer layer and a special aggregates layer. VIBA-HDPE is used to waterproof the blind concrete surface, the upper aggregate side is made for application the reinforced system on the top and then fulled bonding and eternity to the concrete after casting. VIBA-HDPE membrane is supplied with the 1m, 2m width in order to suitable with many different construction conditions.
MAIN APPLICATIONS
• Waterproofing of all below grade concrete structures
• Protection of concrete foundations in contaminated and aggressive ground conditions
• Waterproofing of cut and cover tunnels for MRT,Subway, Metro
• Prevents coal gas, marsh gas, methane leakage inunderground layers
PRODUCT’S FEATURES
• Forms a unique integral seal to concrete poured against it. This prevents lateral water migration and waterproofing performance is unaffected by ground settlement beneath slabs
• Resist fully the waterleakage, fulled bonding for watertight selvedge laps and detailing, not allow water tranverse intrusion.
• Easy and fast schedule installation, it does not require any primer layer of fillet, not be effected by the wet condition on the substrate.
• Apply easily on the fixed formwork, it gives more advantages affective in the limited areas, often using for the vertical.
• The protection is not required, reinforced bar can be installed immediately after finishing the membrane.
• HDPE layer can resist the mechanical, chemical highly, and have the good effective in all of ground and water, protect the structure against the clorua, sulphate and hard condition.
SUBSTRATE PREPARATION
• The substrate need to be prepared well and stably to fix the connective membranes, not allow the movable membrane during the casting.
• For the horizontal, substrate shall be free of all aggregate and excees material. The surface does not need to be dry, but standing water must be removed.
• For the vertical, the formwork acts the fixing system for the membranes to install the waterproofing layers for the blind concrete surface.
INSTALLATION
• VIBA- HDPE membranes are spreaded on the top of waterproofing areas.
• The membrane sheets can be overlapped by steel roller in order to ensure the fully bonding and to achieve continuity.
• VIBA- HDPE shall be installed of temperature 5°C and above. In cold weather, care the membrane should be taken pre-heat the bondind edge with appropriate means such as hot air gun or other similar means.
BẢNG CHỈ TIÊU CƠ LÝ/ PHYSICAL PROPERTIES TABLE
• Các giá trị trên có sai số trong phạm vi ± 10%
All values are given subject to ± 10% tolerance
AUXILIARY MATERIALS
• The special sealant tape: Be used for the overlap bonding of the end of the membrane and used for reparing.
• The sealant glue: Be used for sealing the joint and reparing.
SUPPLY
STORAGE
Dry conditions below +40ºC. Store indoors or under cover on pallets. Do not double stack pallet.
PRODUCTION
The product is producted following the Basic standard of Vietbase Limited Company, and it is carried out of production with the OEM method in the credit foreign manufacturers. The product shall be origin form China, Malaysia, UAE…depending on the actual condition. Vietbase Limited Company have the responsibility to pusblish the product’s certificate quality in Vietnam.
The technical properties are published which based on the actual knowledges and applications, and tested in the standard conditions. Any site testings or different conditions can show the torelance of the results. In this case, please do not hesitate to contact to manufacturer in order to get the instructions and advisories.
VIBA- HDPE is pre- applied, HDPE surface, self adhesion and fulled bonding include many of composite layers material which gives the outstanding waterproofing effectives, it contains a high density PE layer, a self adhesion polymer layer and a special aggregates layer. VIBA-HDPE is used to waterproof the blind concrete surface, the upper aggregate side is made for application the reinforced system on the top and then fulled bonding and eternity to the concrete after casting. VIBA-HDPE membrane is supplied with the 1m, 2m width in order to suitable with many different construction conditions.
MAIN APPLICATIONS
• Waterproofing of all below grade concrete structures
• Protection of concrete foundations in contaminated and aggressive ground conditions
• Waterproofing of cut and cover tunnels for MRT,Subway, Metro
• Prevents coal gas, marsh gas, methane leakage inunderground layers
PRODUCT’S FEATURES
• Forms a unique integral seal to concrete poured against it. This prevents lateral water migration and waterproofing performance is unaffected by ground settlement beneath slabs
• Resist fully the waterleakage, fulled bonding for watertight selvedge laps and detailing, not allow water tranverse intrusion.
• Easy and fast schedule installation, it does not require any primer layer of fillet, not be effected by the wet condition on the substrate.
• Apply easily on the fixed formwork, it gives more advantages affective in the limited areas, often using for the vertical.
• The protection is not required, reinforced bar can be installed immediately after finishing the membrane.
• HDPE layer can resist the mechanical, chemical highly, and have the good effective in all of ground and water, protect the structure against the clorua, sulphate and hard condition.
SUBSTRATE PREPARATION
• The substrate need to be prepared well and stably to fix the connective membranes, not allow the movable membrane during the casting.
• For the horizontal, substrate shall be free of all aggregate and excees material. The surface does not need to be dry, but standing water must be removed.
• For the vertical, the formwork acts the fixing system for the membranes to install the waterproofing layers for the blind concrete surface.
INSTALLATION
• VIBA- HDPE membranes are spreaded on the top of waterproofing areas.
• The membrane sheets can be overlapped by steel roller in order to ensure the fully bonding and to achieve continuity.
• VIBA- HDPE shall be installed of temperature 5°C and above. In cold weather, care the membrane should be taken pre-heat the bondind edge with appropriate means such as hot air gun or other similar means.
BẢNG CHỈ TIÊU CƠ LÝ/ PHYSICAL PROPERTIES TABLE
STT/NO | CHỈ TIÊU / PROPERTIES | ĐƠN VỊ / UNIT | GIÁ TRỊ / VALUE | TIÊU CHUẨN/STANDARD |
1 | Chống tĩnh tải/ Resistant to static loading | 20 kg |
Không rò rỉ/ No leakage |
EN 13967: 2012 |
2 | Cường độ mối nối/ Joint strength | N/50mm | 500 | EN 13967: 2012 |
3 | Chống xé ngang/ Tear resistant- Tranverse | N | ≥ 500 | EN 13967: 2012 |
4 | Chống xé dọc/ Tear resistant- Longitudinal | N | ≥ 200 | EN 13967: 2012 |
5 | Độ kín nước/ Water tightness |
Không thấm nước/ No leakage |
EN 13967: 2012 | |
6 | Độ bền kéo dọc khổ/ Tesile Strength- Longitudinal | N / mm 2 | ≥ 15 | EN 13967: 2012 |
7 | Độ bền kéo ngang khổ/ Tesile Strength- Transverse | N / mm 2 | ≥ 15 | EN 13967: 2012 |
8 | Độ giãn dài khi đứt dọc khổ/ Elongation Break- Longitudinal | (%) | ≥ 400 | EN 13967: 2012 |
9 | Độ giãn dài khi đứt ngang khổ/ Elongation Break - Transverse | (%) | ≥ 400 | EN 13967: 2012 |
10 | Cường độ chọc thủng/ Puncture Resistant | N | 1000 | ASTM E154 |
11 | Cường độ kéo bóc với bê tông đổ trực tiếp/Peeling strength with post- poured concrete | N/mm | ≥ 1 | EN 13967: 2012 |
12 | Chịu áp suất thủy tĩnh/ Hydrostatic pressure resistant | 0.7 MPa, 1 hour |
Không thấm/ No water leakage |
ASTM D5385-1993 |
• Các giá trị trên có sai số trong phạm vi ± 10%
All values are given subject to ± 10% tolerance
AUXILIARY MATERIALS
• The special sealant tape: Be used for the overlap bonding of the end of the membrane and used for reparing.
• The sealant glue: Be used for sealing the joint and reparing.
SUPPLY
STORAGE
Dry conditions below +40ºC. Store indoors or under cover on pallets. Do not double stack pallet.
PRODUCTION
The product is producted following the Basic standard of Vietbase Limited Company, and it is carried out of production with the OEM method in the credit foreign manufacturers. The product shall be origin form China, Malaysia, UAE…depending on the actual condition. Vietbase Limited Company have the responsibility to pusblish the product’s certificate quality in Vietnam.
The technical properties are published which based on the actual knowledges and applications, and tested in the standard conditions. Any site testings or different conditions can show the torelance of the results. In this case, please do not hesitate to contact to manufacturer in order to get the instructions and advisories.